Gasketed Plate Heat Exchanger-GPHE

In a gasketed plate heat exchanger, the plates are fitted with elastomeric gaskets which seal the channels and direct the fluids into alternate channels. The plate pack is assembled between a frame plate and a pressure plate, and compressed by tightening bolts fitted between these plates. The channel plates and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to the support column. The physical design of the gasketed plate heat exchanger allows easy cleaning, and modification of capacity by the addition or removal of plates.

● Food industry: Milk pasteurization Milk and beverage pasteurization, Wine tempering, Bottled water treatment, CIP (Cleaning-in-Place) heating, Reverse osmosis water.

● Marine application: Central cooling of the main or auxiliary engines or turbines, Lubrication oil cooling, Recooling of circulated water for cooling cylinders, pistons, injection nozzles, Cooling of Baoder oil, compressor oil and other lubricants, Preheating of lubrication oil and heavy fuel oil, Preheating of seawater for fresh water production, Heat recovery, Heat exchange to air-condition the passengers' cabins and freight spaces.

● Others: Turbine oil cooler, Chemical industry, district heating, district cooling, swimming pool heating, solar heating.

Food Industry

Shipbuilding Industry

Turbine Oil Cooling

Chemical Industry

District Heating

District Cooling

Swimming Pool Heating

Solar Heating

● All models are available with different frame designs and different plate thickness depending on the required design pressure. The maximum temperature depends on the gasket material used, and the working pressure

● Low angle channel arrangement For lower allowable pressure drop requirement applications

● Mixed channel arrangement Optional arrangement to gain the optimized performance

● High angle channel arrangement For higher thermal performance and alloable pressure drop requirement applications